04.4 Equipment for Repair/Maintenance/Cleaning, Workshop/Store Outfitting

Centre Bolt - 6" Power Brush for Trident Neptune Deck Scaler.

Centre Bolt - 6" Crimped Wire Cup Brush for Trident Neptune Deck Scaler.

Crimped Wire Cup Brush for Trident Neptune Deck Scaler.

6" Power Brush for Trident Neptune Deck Scaler.

Centre Bolt - HD Head for Trident Neptune Deck Scaler.

Cutter Pin - HD Head for Trident Neptune Deck Scaler.

Side Plates (set of 2) - HD Head for Trident Neptune Deck Scaler.

Chipping Leaf - HD Head for Trident Neptune Deck Scaler.

Cutter Pin - Scaling Head for Trident Neptune Deck Scaler.

Side Plates (set of 2) - Scaling Head for Trident Neptune Deck Scaler.

Cutter Wheel - Scaling Head for Trident Neptune Deck Scaler.

The Trident Neptune will rapidly remove scale, rust, paint and other unwanted deposits, leaving a good surface suitable for priming, painting and coating applications.

The KAV30 is ATEX approved for Gas Zone 1 and Dust Zone 21 under category 2 of the ATEX Directive. Each machine is issued with an earth path continuity certificate.

Piston for SF11 Deck Hammer Pneumatic. To fit cutter heads.

Spare Head for SF1 / SF1 VL / SF11 Pneumatic Scaling Hammer single head. Cruciform taper fit cutter head.

Service Kit for SF11 Deck Hammer Pneumatic.

For fast scaling of decks the walk behind SF11 is a fast, effective means of removing hard coatings and corrosion.

Star Cutters for TFP200 Deck Scaler. Required 208 pieces per drum.

Spacers for TFP200 Deck Scaler. Used to create a gap in between TCT. Required 88 pieces per drum TCT.

Spare Drum c/w TCT Cutters for TFP200 Deck Scaler. Consists of drum, 4 12mm shafts, 80 TCT cutters & 88 spacers.

Drive Shaft Bearing for TFP200 Deck Scaler.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30m_ per hour.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30m_ per hour.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30sqm per hour.