04.4 Equipment for Repair/Maintenance/Cleaning, Workshop/Store Outfitting

Nickled aluminium.

Nickled aluminium.

Service Kit for SF1 ATEX VL Pneumatic Scaling Hammer single head.

Non-Spark 3mm Beryllium Cooper Needles x100 All ATEX Models Pneumatic Needle Scalers.

The VL303 ATEX series is the solution for corrosion management in high risk surroundings such as natural-gas installations, oil and LNG tankers, gas works, oil drilling platforms, refineries, petrochemical plants and shipyards.

75mm Twisted Knot Wire Brush for Pneumatic Angle Grinder.

Chisel 203 mm long with 100 m wide blade for Long Reach Pneumatic Chisel Scaler.

Lightweight, robust and high performing pneumatic angle grinder to suit a wide variety of grinding and cutting applications.

Lightweight, robust and high performing pneumatic angle grinder to suit a wide variety of grinding and cutting applications.

Type C Rotopeen Flaps for PPT Pneumatic Hand Scaler.

The real alternative to small area shot blasting. It is ideal for preparing flat or large vertical areas such as beams, girders and tanks.

Centre Bolt - HD Head for Trident Neptune Deck Scaler.

Chipping Leaf - HD Head for Trident Neptune Deck Scaler.

Cutter Wheel - Scaling Head for Trident Neptune Deck Scaler.

The KAV30 is ATEX approved for Gas Zone 1 and Dust Zone 21 under category 2 of the ATEX Directive. Each machine is issued with an earth path continuity certificate.

Brush Seal for SF11 Deck Hammer Pneumatic.

For fast scaling of decks the walk behind SF11 is a fast, effective means of removing hard coatings and corrosion.

Star Cutters for TFP200 Deck Scaler. Required 208 pieces per drum.

Spacers for TFP200 Deck Scaler. Used to create a gap in between TCT. Required 88 pieces per drum TCT.

Spare Twisted Knot Wire Brush for TFP200 Deck Scaler. Consists of drum & 14 crimped wire brush segments.

Spare Drum c/w Beam Cutters for TFP200 Deck Scaler. Consists of drum, 4 12mm shafts & 208 star cutters.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30m_ per hour.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30sqm per hour.

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).