04.4 Equipment for Repair/Maintenance/Cleaning, Workshop/Store Outfitting

Closed body turnbuckle with an eye on one side and a locknut and clip with nut and bolt on the other side. Complete with slip hook.

Star Cutter for PPT Pneumatic Hand Scaler.

Beam Cutters for TFP200 Deck Scaler. Required 264 pieces per drum.

The TFP200 Deck Scaler is perfect for removing coatings and corrosion from decks, hatches and tank bottoms. The rigid steel chassis ensures a strong, stable machine suitable for accurate surface preparation. Production rates up to 30m_ per hour.

Professional equipment for cleaning holds, aluminium hatches, ship's shells and engine rooms. The use of a non-return valve is recommended as the pump is not self-priming.

Stainless steel 316. Thimble for steel wire.

Service Kit for SF1 / SF1 VL Pneumatic Scaling Hammer single head.

Spare Head for SF1 / SF1 VL / SF11 Pneumatic Scaling Hammer single head. Cruciform taper fit cutter head.

Made in accordance with DIN 1478. Closed body turnbuckle with locknut on both sides and clip with nut and bolt. Safety factor 4 (minimum breaking load is 4 x working load).

Comes with 9 watt LED bulb (clear white 4000K-4500K), switch, handle, 10 metre cable and plug. Steel protective cage and hook for hanging up and magnet. All steel parts are galvanized. Volt: 230 V.

Slip hook for turnbuckle.

Suitable for ethylene glycol (ethanediol) -water mixtures. New technical principle, simple, quick and precise measurement. Stable plastic housing with eye on the suction membrane. Oscillation free indicator.

Stainless steel 316. DIN 5399.

Open body turnbuckle with an eye on one side and a hook.on the other side. Eye -hook (eye = right-hand thread / hook = left-hand thread).

Made in accordance with DIN 1480. Open body turnbuckle with an eye on one side and a hook.on the other side. Eye -hook (eye = right-hand thread / hook = left-hand thread).

Stainless steel 316. Thimble for steel wire.

Stainless steel 316. Thimble for steel wire.

Made in accordance with DIN 6899, galvanized. Thimble for steel wire.

Made in accordance with DIN 6899, galvanized. Thimble for steel wire.

Made in accordance with DIN 6899, galvanized. Thimble for steel wire.

ATEX certification allows for use in Gas Zone 1 make it suitable for use where alternative methods are prohibited. The single head model is suitable for smaller and hard to reach areas.

Beryllium Copper Head for SF11 ATEX / SF1 ATEX VL Deck Hammer Pneumatic.

Service Kit for SF11 ATEX Deck Hammer Pneumatic.

Type C Rotopeen Flaps for PPT Pneumatic Hand Scaler.